o Matsushita/Panasonic (Creative) CR-562/CR-563 proprietary interface
V Jessica
i
a 53116
g
r Jessica
a 57000
U
n Jessica
d
e
r 49866
3 Jessica
D
o 49696
l
l
a Jessica
r
s 71175
http://snt.erifarm.net/
A. No problem, just do
specifies how many simultaneous PPP connections to support.
sio8: type 16550A (multiport)
working actively on the system. See ``Staying current with
supposed to send +12 VDC or -12 VDC, and the receiver is supposed to
floppy, e.g.: a:\bin\bin.aa, a:\bin\bin.ab, and so on.
You can cause the LKM to be loaded when the system boots in either of
Data thruput ranges from 150kB/s to 500kB/s. Data capacity ranges
exit
details.
time goes by. Little, if any, documentation currently exists at this
FreeBSD uses a layered SCSI subsystem. For each different controller
line or a network connection. Nearly all PostScript printers support
______________________________________________________________________
F20 is pushing the limits quite a bit, so you'll quickly find out if
or
Because of the patents, reverse-engineered designs and emulations had
7.5.5. Administrating Printers
ipfw [-N] command [index] action [log] protocol addresses [options]
can find it all right here?
directory trees that can be exactly recreated by your computer. An
|| exit 2
be set up so that you can limit which users can talk to which
./support/install.sh -c -m 644 builtins.1 /usr/local/man/man1/bash_builtins.1
ports-archivers: /usr/ports/archivers archiving tools
Regardless of whether the data was received correctly or not, the UART
the category of event that caused the
command which one you want by specifying the section:
24. Bibliography
mt(1) provides generic access to the tape drives. Some of the more
If your change is of a potentially sensitive nature, e.g. you are
this was replaced by a mechanism using the RSA Data Security, Inc.,
sup supfile
on the Adaptec 154x driver.
cd /dev
% Now show the boring particulars
To decide if a packet should be passed on or not, the code looks
(``Loadable Kernel Module'') so it can be installed on the fly without
Registers. Setting this bit, loading
-wwidth -llength
which is used if we fail to hear from the host in a specific amount of
We then extracted the gnats skeleton and went into the gnats directory
Here is an example that might make old hands at FORTRAN blush. It is
#
compatibility so you you must reconfigure your kernel for it. There
/usr/local/Mathematica/bin add the following line:
problems in sequence as you design your new Makefile:
7.4.2.2.6. Installing the Text Filter
DES versions:
# The next macro will dial up and login
usr.bin/lex
24:#14 0xf012d014 in vn_open ()
Hewlett-Packard HP 35470A
destination).
data to the printer. Parallel interfaces are common in the PC
control signals -MEMR (Memory Read), -MEMW (Memory Write), -IOR (I/O
7.3. Setting Up the Spooling System
After some time an industry effort was started to come to a more
NO-GO. The following sections try to list all the pitfalls and
day use of FreeBSD Release 2.1.5. This manual is a work in progress
o ATA
showpage
printer; here is bamboo's entry:
in the emulated UART unless special drivers are used.
options LINUX
known as a DTE-to-DTE cable.
sio1: type 16550A (multiport)
o Timely accounting is less common, probably because it is more
As a result of the way that IPFW is designed, you can use IPFW on non-
Please let us know! We may be able to work cooperatively on some
tracks, and therefore the width of a track, varies with the tape's
Contributed by Paul Richards <paulFreeBSD> and Joerg Wunsch
file, so it has no idea whom to charge for printer use. It is also
The lpq command also support a -l option to generate a detailed long
new kernel ``does not boot''.
got both the port source & distfile(s) from, and what the error
exec grops | /usr/local/libexec/lprps "$"
the shared library anyway if it is a newer version, though. You can
SoundBlaster, and ProAudioSpectrum users, if you want to play
# cd /dev
o Q. So why bother with ports then?
Here is an example. This is the /etc/printcap file for the host rose.
the chain. Clearing is used to zero out one or more accounting
For example, let us add a minfree file for the printer bamboo.
+0x00 read Receive Buffer Register (RBR)
following, will suffice:
otherwise know where to turn for it. All ported software is organized
we will call it a ``secret password'' or just unqualified
Note this does not affect the ${MASTER_SITES} you define in your
libXXXX.so.N.mm on a Linux ftp site, and install it on your system.
mailqueue whenever I have the PPP link up, by typing
fashion (3 days to a week, depending on your email connection) or
``Trying It Out'' and ``Troubleshooting''.
might require you to configure somewhat complex communications
56:$2 = 1767990816
device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr
0xd6 read -
7.4.2.2.8. Troubleshooting
administrative one; it does not mean the person concerned is
device eg0 at isa? port 0x310 net irq 5 vector egintr
not available. For example,
help command-name
#
This is the mailing list for people discussing FreeBSD
Note: If you have a serial mouse, ignore these two lines,
Otherwise, odd parity is used.
written, the first following expression is the address to write to,
grunt# ext_srvtab grunt
4. Before compiling stable, read the Makefile in /usr/src carefully.
You should use a separate accounting file for each printer, as lpf has
options UCONSOLE
bamboo|ps|PS|S|panasonic|Panasonic KX-P4455 PostScript v51.4:
#
quick way to get printer accounting working for plain text, or if
violet
/Helvetica findfont 12 scalefont setfont
# rattan is connected to rose; send jobs for rattan to rose:
directory /etc/kerberosIV and check that only the following files are
packet filtering or firewall security in either or both directions.
text formatter, etc) it would be silly to refuse additional
explanations of the device lines is present in the LINT configuration
Through a configuration file, and by providing the special filter
different version of FreeBSD because the device flags have changed
PPP on the remote host )
17.2.3. Starting off with CTM for the first time
Your choice of local and remote addresses for your SLIP links depends
That is it. You can type lpr plain.text and lpr whatever.ps and both
bamboo|ps|PS|S|panasonic|Panasonic KX-P4455 PostScript v51.4:\
libraries by hand instead. You will need the Linux shared libraries
to the end of the FreeBSD slice.
WWW, ftp, routing and firewall (security) services.
0 1 1 First Receiver Error
6.4.4.2. Listing the IPFW rules
product work? You will find us receptive to your requests, given that
for ep.c).
questionsFreeBSD>describing your modem and youer problem, and the
to be copied to the printer.
71:tf_err = 582, tf_eip = 75749, tf_cs = 31, tf_eflags = 582, tf_esp \
[the header...just to make it easier for us to identify the ports]
mkdir /mnt/dev
and circuits are required to share a clock signal between the sender
might be the result of using a higher data transfer rate then your
#
communication parameters with the fs, fc, xs, and xc capabilities;
read: fastest feasible, transfer rate. This option is disabled by
usr.bin/lex
alter its interpretation of these characters. Check your
local host), but specifically it is an alias. Such routes only show up
forth. And you do so by modifying the filters to save this
Use title on the pr header instead of the file name. This
over the legal status of the Berkeley Net/2 tape. A condition of that
device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr
Now you run FreeBSD diskless, even though you do not control the
To see whether the LKM is loaded, run `modstat'.
If you have a ftp-URL pointing at the the original tarball, record the
the commercial giants struggle to field PC operating systems with such
10.4.5.7.
# ./MAKEDEV tun0
The trick in setting this up is that the MSB of the flags represent
going to use ``proxy ARP'' on your SLIP server (it is not ``true''
When you go to do the installation, you should also make sure that you
example, to learn more about ls command type:
rdist-1.3alpha rdist-1.3a no strings like `alpha' allowed
to be "Marking", or transmitting continuous "1" values.
The amber one indicates warnings: slow flash when cleaning is required
Suppose you add the IDE CD-ROM support to the kernel. The line to add
appointed, maybe you would like to volunteer?
automatically discards the Start, Parity and Stop bits. If the sender
their function allows this is another matter, but the standard does
Reflects the state of the DCD line
network_interfaces="lo0 tun0 ep0"
recent version.
general questions mailing list <freebsd-
As we have mentioned before, the above scheme, though fairly simple,
10.3.3.1.6. The IBM Personal Computer UART
points to actually perform encryption. The code was partitioned in
Contributed by Jordan K. Hubbard <jkhFreeBSD>.
the XFree86 distribution. Find a location with some free space and
13.1.1. An example
between two systems with a wired connection, or if a modem is in use
10.4.9.3.
17.1. SUP
sizes to reasonable values considering the maximum number
Note that, before prompting for a password, the login program prints
several completely different things).
any bits of characters that are being
o A modem cable connects each pin of the connector on one end of the
Here is an outline of the steps involved:
the same time, the UART will report the
checks the functionality of these modes so over fifty differences are
and on CD-ROM from Walnut Creek CDROM:
core-team member has returned 2 of these drives. Neither lasted more
o Jolitz, William. "Porting UNIX to the 386". Dr. Dobb's Journal.
21.2.4. Acknowledgments
where width is from the pw capability and length is from the pl capa-
#!/bin/sh -
memory, and so all of that unused code ties up pages of RAM that
for other file formats), to count pages or query the printer for pages
disks/floppies or other HW to function.
For all FTP transfers, use ``Active'' mode. This will not work
/u/people/guests/wurzburger/local.
example (kelly printed the job named outline from host rose):
you are an active developer on FreeBSD, but have lousy or non-existent
5.1. Why build a custom kernel?
DTR is connected to DSR, OUT1 is
54:$1 = (struct tty *) 0x1bae
If your hardware is supported, reset the computer and when the Boot:
10.3.3.2.1. Digi International (DigiBoard) PC/8
them when you ever decide to reconfigure your SCSI bus. There is
possible. This is typically less than 5K, with the occasional (one in
routedflags=-s
drives. These drives have their own controller card or might
the FIFO is active.
Serial transmission is commonly used with modems and for non-networked
get that site in big trouble! A legal copy of this is available from
relevant (do not try 10 kVolts though..).
ports-misc: /usr/ports/misc miscellaneous utilities
where you connect and a hardware device (T1-GW) attached to the ISP's
Max ticket lifetime (*5 minutes) [ 255 ] ?
connection) counts as a dual-homed host. But the term is really only
<freebsd-docFreeBSD>. It is the objective of the FreeBSD
}
and de-asserts the HOLDA signal. Now the CPU activates its -MEMR,
There is only one sure way to do accurate accounting. Get a printer
command; these can then be printed out. For example:
OK, and now where should you install your terminators? This is by far
o ftp6.FreeBSD/pub/FreeBSD
possible. This is typically less than 5K, with the occasional (one in
NFS installation is fairly straight-forward: Simply copy the FreeBSD
snapshot. Those plans came to a rude halt when Bill Jolitz suddenly
4. Full LKM based driver support/Configuration Manager.
terminal solution, either using the freely available XFree86 server
enter any commands, lpc enters an interactive mode, where you can
PC16550D, which are the parts most computer and modem makers want to
grunt# klist
______________________________________________________________________
Data transfer rate is 180kB/s.
to disassemble the first 0x10 instructions of foofunc, and display
``SDT-5000''
will affect the users, and instructions on steps that must be
to read the on-line manual while single-stepping the kernel.
o X Window workstation: FreeBSD is a fine choice for an inexpensive X
<nateFreeBSD> and Poul-Henning Kamp <phkFreeBSD>
your SCSI bus is electrically sound.
include this.
connected to the Internet at the time. Once you've downloaded it from
information.
print a summary of the commands available.
additional 11 blocks will fail.
it to talk the appropriate routing protocols to your other routers to
# DVI to PostScript printer filter
an MS-DOS partition, and if you have a network connection, via
key is.
o Network mask
controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr
Although the SCSI standard tries to be complete and concise, it is a
poll the enabled interrupt categories (usually
enter any commands, lpc enters an interactive mode, where you can
devices, refer to the appropriate section of the LINT kernel
The pattern is the year followed by the month.
Note how we used the correct format: the first line starts in the
the job to the printer:
On an old FreeBSD 1.1 system, these entries were added to
:if=/usr/local/libexec/hpif:\
new kernel ``does not boot''.
accounting for printer usage.
called the "Start Bit" is added to the beginning of each word that is
dvilj2p makes the filter hpdf quite complex since dvilj2p cannot read
54:$1 = (struct tty *) 0x1bae
reference manual explaining the basic operation and various arguments.
MD5 one-way hash function. Because neither of these functions involve
18.2.5.7.10. PREFIX
stty -f /dev/ttyd3 crtscts
6. If you ain't got the source, it ain't software! ;-)
You might also want to take this opportunity to adjust other settings
limit on file size. Note that the limit applies to files in a job,
please see ``Obtaining FreeBSD'' in the Appendix.
receive buffer, and supports data rates to 230.4Kbit/sec. Made
necessary authorization on the remote host. ( Example of such script
richc.isdn.bcm.tmc.edu 9845-03452-90255
Contact Ancot for availability information at: Phone: (415)
10.4.6. * CD-ROM drives
set file type binary
password. The things you need to enter depends on your
``Digital TZ87''
If it does not work, feel free to ask me. The things that people
Use:
The floppy disk controller only has a one-byte buffer, so it
removes them.
device lnc0 at isa? port 0x300 net irq 10 drq 0 vector lncintr
3. Connect to the printer with tip. Type:
Mercury:
(but it does not require a sound card).
critical ones (some languages, perhaps).
Received on Sat Dec 02 2006 - 10:13:28 EST
This archive was generated by hypermail 2.2.0 : Sat Dec 02 2006 - 10:17:21 EST